Lokar ACA-1800 Billet Adjustable Column Arm Kit, GM Transmissions

Description

The billet aluminum construction offers rigidity, Features a "U-Cut-to-Fit" stainless connecting rod, Includes a 3/4-48 spline designed for 360 degree rotation allowing proper ratio, Will fit GM TH-350, TH-400, 700-R4, TH-200, 200-4R, 4L60, 4L60E and 4L80E transmissions, Includes both 3/8-16NC and metric 10-1.50mm threaded nuts for mounting electrical accessories
Lokar ACA-1800 Billet Adjustable Column Arm Kit, GM Transmissions
Sku # 4911800
Mfr. Part # ACA-1800
Condition
New
Brand
Lokar
Sold
Each
Details
Info
Simplify connecting your column shift to your transmission with a Lokar machined billet aluminum Adjustable Column Shift Linkage Kit. Works with all aftermarket GM style columns and most GM factory columns. Our rigid, clean line design allows the proper ratio adjustment between the transmission and the indicator on the column.
Billet aluminum offers rigidity
3/4-48 spline designed for 360 degree rotation allowing proper ratio
Both 3/8-16NC and metric 10-1.50mm threaded nuts for mounting electrical accessories
Kit includes all hardware, including column bushing and rod ends
"U-Cut-to-Fit" Stainless Connecting Rod
No threading necessary
20.5" rod length
Fits GM TH-350, TH-400, 700-R4, TH-200, 200-4R, 4L60, 4L60E and 4L80E transmissions
Ordering Idea:
You can use the Backup Light or Neutral Safety Switch Kit # 491-1400 with GM Column Shift Linkage, except for 4L60E and 4L80E transmissions.
Tech Tip:
If you don't have a direct line of sight between the column shift arm and the transmission shift arm, consider using column cable shift linkage # 491-1804 or # 491-1805
Application
This Part Fits
TH350
TH400
700-R4
TH200
200-4R
4L60
4L60E
4L65E
4L70E
4L75E
4L80E
4L85E
Charts
(PDF)
WARNING: Cancer and Reproductive Harm -- p65Warnings.ca.gov
Specs
Sold in Quantity
Each
MFG. Part #
ACA-1800
GTIN Code
815470006069
Rod Length
20.5
Reviews
Works with a little fab on GM A-Body
Rated
by Myles on June 11, 2021
Summary:
I used this on my 1970 Monte Carlo that I installed a 4L60e. I put a slight bend in the rod and it works without issue. Shifts into and out of gear well. It is easy to adjust and cut to fit. The arm on the transmission features a nut for attaching the Dakota Digital gear shift indicator.
Pros:
Adjustable
Works with Dakota Digital Shift Indicator
Yes, I recommend this product.
YES
Rated
by K BURT on May 25, 2021
Summary:
EASY TO INSTALL
Pros:
EASE OF INSTALLATION
Yes, I recommend this product.
I will by this product again and again.
Rated
by JR on February 28, 2021
Summary:
This universal shift linkage arrangement worked again as it always has for me in the past. It seems to be compatible with just about anything; recently a 56 chevy with a 700 trans.ye
Yes, I recommend this product.
I would buy again
Rated
by Popeye on February 11, 2021
Summary:
Great products
Yes, I recommend this product.
Nice product great material.
Rated
by Ursman on January 10, 2021
Summary:
Great product, hardware of great quality and packaging is efficient for shipping.
Yes, I recommend this product.
Related Items / Suggested Parts
Lokar ACA-1804 Cable Column Shift Linkage, 2 Inch Aftermarket GM
Lokar ACA-1805 Steering Column Cable Shift Linkage, 2-1/4 Inch Columns
Lokar BL-1400U Neutral Safety Switch or Back-Up Light Switch Kit
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.